EN
- Overview
- Related Products
The high - end and intelligent MHK-2S1050TT Double Unit Hot Foil Stamping and Die Cutting Machine. This double - unit die cutting machine, custom - tailored for the paper product packaging, printing and other industries, can not only achieve precise registration for two - time hot foil stamping, but also handle difficult processes such as embossing after hot foil stamping and die cutting after hot foil stamping. With stable operation and high - quality finished Products, this equipment can ensure that your processes remain complex while reducing the number of personnel by half, doubling the efficiency and significantly improving the quality. It is an excellent choice for creating high - end paper products.
 |  |  |
1: Feeder High-speed paper feeding feeder head, which can be adjusted freely according to the paper conditions. | 2: Paper feeding table Adopting gas spring auxiliary power, a deceleration mechanism for reaching the position, and a paper - pressing wheel device with overall adjustment equipped with the paper - pressing frame, it enables quick adjustment. | 3: Servo controlled gripper bar positioning device The rear positioning of the gripper bar adopts a servo control system. The accurate precision of each gripper bar can be adjusted via the buttons on the PLC touch screen, ensuring the precision of the gripper bar, which permanently reaches an accuracy of ±0.075mm (patented product). |
 |  |  |
4: Honey comb plate micro adjustment device A 20-zone independent control system effectively regulates the heating temperature of the hot stamping plate, ensuring a more balanced and stable temperature control across the entire heating system. | 5:Foil delivered unit The three - longitudinal and two - transverse independent aluminum foil feeding system ensures smooth and accurate transfer of hot stamping foil at high speeds. It features reliable tension control and minimal aluminum foil stretching. | 6: Plate frame fine - tuning device Adopt center-line system and quick locking device to save make ready time. |
 |  |  |
7: Fine - tuning die - cutting bottom plate The combined lower backing plate features a center - positioning structure (3.5mm + 1.5mm) with a fine - tuning function, enabling easy adjustment of the bottom die. | 8: Synchronous belt transmission, intermittent mechanism The high - precision intermittent divider from Taiwan can ensure high positioning accuracy even after long - term use. | 9: Cooling and Lubrication Mechanism of the Main Engine The lubrication of the main engine during long - term high - speed operation is ensured, and the normal temperature of the main engine lubricating oil is maintained by the automatic oil - pumping circulating cooling device. |
 |  |  |
10: Paper collecting unit The rolling - curtain - type auxiliary paper - collecting rack enables paper collection without shutting down the machine. It has two - way auxiliary air - blowing for paper collection and a manual sampling mechanism, ensuring convenient operation. | 11: Germany vacuum pump Germany Becker oil free blower and vacuum pump. | 12: Concentrate lubrication Efficient Concentrate lubrication system enable the machine runs at the high speed for long time by lubricate main drive chains, important Cams and bearings. |
Model | MHK-2S1050TT |
Maximum Sheet Size，mm | 1050×750 |
Minimum Sheet Size，mm | 400×360 |
Inner Chase Size，mm | 1080×745 |
Maximum Cutting Size，mm | 1040×720 |
Maximum Stamping Size，mm | 1040×720 |
Minimum Gripper Margin，mm | 9-17 |
Cutting Rule Height，mm | 23.8 |
Stock Range，mm | 80~2000g/m²，0.1~2mm，≤4mm Paper: from 80 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
Stamping Accuracy，mm | ≤±0.075 |
Holographic Positioning Stamping Precision (opt.) ，mm | ≤±0.075 |
Die Cutting Accuracy，mm | ≤±0.075 |
Maximum die Cutting Force，T | 600t +600t |
Maximum working Speed，s/h | 7200 |
Net Weight of Machine，T | 37 |
Maximum Pile Height at Feeder-Normal Mode，mm | 1600 |
Maximum Pile Height at Delivery，mm | 1400 |
rking SMax.gold Foil Diameter | Ф250mm Longitudinal，Ф200mm Transversal |
Electric-heated System | 20Heating zones，40~180℃ Adjustable |
Foil width，mm | 20~1020 |
Press 1 Foil Advance Shafts | 3Longitudinal+2Transversal（opt） |
Press 2 Foil Advance Shafts | 3Longitudinal+2Transversal（opt） |
Full Load Wattage，kW | 114 |
Air Requirement | 0.6～0.7MPa，≥1m3/min |
Function introduction：
1. Hot Stamping + Hot Stamping
2. Hot Stamping + Die-Cutting
3. Embossing (Deep Embossing) + Die-Cutting
4. Hot Stamping + Embossing (Deep Embossing)
FAQ：
Q: What is the delivery time for MHK-2S1050TT?
A: The delivery time is approximately 80 days. The specific time depends on the degree of customization of the project.
Q: Can your machines be used in areas with extreme weather conditions?
A: Generally speaking, they can be used. However, it needs to be analyzed according to the specific environment. You can send an inquiry to consult us.
Q: Are there any color options for the machine?
A: You can customize special color schemes! The color scheme of our equipment is usually as shown in the diagram, and you can customize it according to your preferences.
Q: How to maintain and clean the die - cutting machine?
A: Under the guidance of professionals, regularly clean the machine body and components. Do a good job in lubrication and electrical inspections, calibrate the accuracy, replace vulnerable parts as needed, and maintain the production environment.
Q: Does the machine have safety production measures?
A: Yes, it does. We will train your workers. Meanwhile, safety doors, photoelectric sensors and other facilities are installed on the machine. Warning signs are posted in prominent positions to ensure production is carried out safely and in compliance with regulations. You can also add more safety - production facilities based on what we've provided.
Q: Do you provide installation services? And do you have a warranty period?
A: Certainly. We offer free first - time installation training and provide free spare parts within the one - year warranty period. For services beyond the warranty period, we will charge a reasonable fee.
Are you ready to enhance the efficiency of your production with our printing and packaging solutions? Contact Us today to get a free consultation and quote. Our team of experts is always ready to assist you.
E-mail adress：[email protected]
TEL：+86-13758835289
Manufacture the best equipment to create value for customers.
